Dedicated Micros Eco4 Instruções de Operação descarregar pdf (Página 135)

135

Eco4

Appendix D

For guidance on locating the unit’s IP address via a serial port connection, please see below:

Locating the unit IP address using the serial port

1. With the mains power off, connect a standard 9DF-9DF RS232 communications cable from

the PC via the serial port connection (COM1) on the rear of the unit.

2. On the PC, click Start->Programs->Accessories->Communications->Hyperterminal and

create a new connection via the COM port using these settings.

Bits per second 115200

Data Bits 8

Parity None

Stop bits 1

Flow Control None

3. Power the unit, the Power LED on the unit will illuminate.

4. Hyperterminal will display the communications information as the unit boots up. This will

include the IP address, Subnet and Gateway.

Intelligent Security & Fire Ltd

1 2 ... 130 131 132 133 134 135 136 137 138 139 140

Sem comentários

Dedicated Micros Eco4 Instruções de Operação Página 135